Ashroyds Way, Barnsley, S74 9SB 0333 555 0004
    30mm Alloy Wheel Spacers Set of Four Terrafirma G16-003-008 getoffroad.com G16-003-008 30mm Alloy Wheel Spacers Set of Four Terrafirma
    Rated 4.9/5 based on 11 customer reviews
    ££160.00 In stock
    Product description: Terrafirma 30mm Alloy Wheel Spacer Set, Suitable for Land Rover Defender 90 110 130Kit includes 4 x 30mm Wheel Spacers with Studs and 20 x Wheel Nuts


    Fitting Instruction:
    1. Put the car into gear and apply the hand brake, loosen front wheel nuts, raise vehicle on a jack and then support the front axle on axle stands.
    2. Remove the front wheels.
    3. Bolt the wheel spacer to the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
    4. When both sides are done refit wheels lower the car off of the axle stands and torque the wheel nuts to 130Nm or 96lb/ft.
    5. Loosen rear wheel nuts, raise vehicle on a jack and then support the rear axle on axle stands.
    6. Remove the rear wheels.
    7. Bolt the wheel spacer to the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
    8. When both sides are done refit wheels lower the car off of the axle stands and torque the wheel nuts to 130Nm or 96lb/ft.

    30mm Alloy Wheel Spacers Set of Four Terrafirma G16-003-008

    G16-003-008 30mm Alloy Wheel Spacers Set of Four Terrafirma
    £160.00 (inc Vat)

    • Availability: In Stock

    • Brand:getoffroad.com
    • Part #:G16-003-008
    • References:

    0% Finance If getoffroad.com could offer 0% Finance as a payment option, would you consider using it?

    G16-003-008 30mm Alloy Wheel Spacers Set of Four Terrafirma

    Kit includes 4 x 30mm Wheel Spacers with Studs and 20 x Wheel Nuts


    Fitting Instruction:

    1. Put the car into gear and apply the hand brake, loosen front wheel nuts, raise vehicle on a jack and then support the front axle on axle stands.
    2. Remove the front wheels.
    3. Bolt the wheel spacer to the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
    4. When both sides are done refit wheels lower the car off of the axle stands and torque the wheel nuts to 130Nm or 96lb/ft.
    5. Loosen rear wheel nuts, raise vehicle on a jack and then support the rear axle on axle stands.
    6. Remove the rear wheels.
    7. Bolt the wheel spacer to the hub using the new wheel nuts supplied and torque the nuts to 130Nm or 96lb/ft.
    8. When both sides are done refit wheels lower the car off of the axle stands and torque the wheel nuts to 130Nm or 96lb/ft.



    AttributeValue